Reference: http://www.juniper.net/techpubs/en_US/junos11.4/topics/topic-map/mcast-mld.html

login: root passwd: root123

root@% cli root> configure root# Entering configuration mode

[edit] lab# edit protocols

[edit protocols] lab# set mld ? Possible completions: <[Enter]> Execute this command accounting Enable join and leave event notification

  • apply-groups Groups from which to inherit configuration data
  • apply-groups-except Dont inherit configuration data from these groups

interface Interface options for MLD query-interval When to send host query messages (1..1024 seconds) query-last-member-interval When to send group query messages (seconds) query-response-interval How long to wait for a host query response (seconds) robust-count Expected packet loss on a subnet (2..10) traceoptions Trace options for MLD | Pipe through a command [edit protocols]

lab# set mld query-interval 150 lab# delete mld accounting lab# activate protocols router-advertisement lab# deactivate protocols router-advertisement

lab# set mld interface ge-0/0/0.0 ? Possible completions: <[Enter]> Execute this command accounting Enable join and leave event notification

  • apply-groups Groups from which to inherit configuration data
  • apply-groups-except Dont inherit configuration data from these groups disable Disable MLD on this interface
  • group-policy Group filter applied to incoming MLD report messages immediate-leave Group is removed immediately without sending query for last membership no-accounting Dont enable join and leave event notification ssm-map Map for SSM translation of MLDv1 messages

static Static group or source membership version Set MLD version number on this interface (1..2) | Pipe through a command [edit protocols] lab# set mld interface ge-0/0/0.0 version 2

lab# show mld query-interval 125; query-response-interval 10; query-last-member-interval 1; robust-count 2; accounting; interface ge-0/0/0.0 { version 1; }

[edit protocols]

lab# quit

[edit] lab# show interfaces ge-0/0/0 { link-mode full-duplex; unit 0 { family inet { address 192.168.3.13/24; } family inet6 { mtu 1500; address 3ffe:501:ffff:104::13/64; } } } ge-0/0/1 { link-mode full-duplex; unit 0 { family inet { address 192.168.4.13/24; } family inet6 { mtu 1280; address 3ffe:501:ffff:103::13/64; } } }

[edit]

lab# commit commit complete

[edit]

lab# commit commit complete

[edit]

How to monitor interface

How to set multi interface

root@switch# wildcard range set interfaces xe-0/0/[1,3,5] apply-groups vlan-ports

How to config lacp

{master:0}[edit] root@switch# set chassis aggregated-devices ethernet device-count 2 {master:0}[edit interfaces] root@switch# set ae0 aggregated-ether-options lacp passive {master:0}[edit interfaces] root@switch# set xe-0/0/20 ether-options 802.3ad ae0 {master:0}[edit interfaces] root@switch# set xe-0/0/21 ether-options 802.3ad ae0 {master:0}[edit] root@switch# show | diff [edit]

  • chassis {
  •  aggregated-devices {

  •      ethernet {

  •          device-count 2;

  •      }

  •  }
  • } [edit interfaces xe-0/0/20]
  • ether-options {
  •    802.3ad ae0;
  • } [edit interfaces xe-0/0/21]
  • ether-options {
  •    802.3ad ae0;
  • } [edit interfaces]
  • ae0 {
  •   aggregated-ether-options {

  •       lacp {

  •           passive;

  •       }

  •   }
  • } {master:0}[edit] root@switch# delete interfaces xe-0/0/20 unit 0 {master:0}[edit] root@switch# delete interfaces xe-0/0/21 unit 0 {master:0}[edit] root@switch# set interfaces ae0 unit 0 family ethernet-switching vlan member default {master:0}[edit] root@switch# commit

Ref: http://www.juniper.net/documentation/en_US/junos14.1/topics/task/configuration/link-aggregation-cli.html